Filter
Top Products
6. Main Menu
6.3.1 Starting up the IRIS Controls
Before starting one of the IRIS functions, be sure the projector has warmed up for at least 20 min. O nly after
20 min the projector has reached its full specifications.
How to start up
1. Push the cursor key ↑ or ↓ to select IRIS control. (m enu 6-22)
2. Press ENTER to select.
The IRIS c ontrol menu will be displayed. (menu 6-23)
MAIN MENU
Image control
Iris control
Sound control
Function keys
Service menus
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-22
IRIS CONTROL
IRIS Touch Up
IRIS Auto Converge
IRIS Full Alignment
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-23
6.3.2 IRIS Touch Up
What can be done?
If you discover in the middle of the image a convergence misalignment between red, gr een and blue, the static convergence of this
currently selected source can be adjusted with the touch up function.
Start up the IRIS touch u p
1. Push the cursor key ↑ or ↓ to select IRIS Touch Up. (menu 6-24)
2. Press ENTER to activate the touch up function.
The process starts and when successfully c ompleted, the projector will return to im age display of the current source.
IRIS CONTROL
IRIS Touch Up
IRIS Auto Converge
IRIS Full Alignment
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-24
6.3.3 IRIS Auto Converge
What can be done?
The autoconvergence on the current source will be carried out automatically, s tarting from the existing settings. By projecting alter-
nately red and blue lines, 25 convergence areas are aligned onto the green pattern.
R5976584 BARCO CINE7 26022003
41