Filter
Top Products
9. Service Mode
If no such a block is available, the projector cann ot run CRT Run In Cycle and leaves the adjustment mode. If you still want to run
CRT run in cycle, create first a memory bloc k on an internal # pattern and restart CRT Run In Cycle .
What is done?
A flashing white image (5sec. on, 5 sec. off) is generated for 5 min. on the first internal block. In the next 5 min., the next internal
block available will be us ed to generate the flashing white image.
The image will also be shifted in a vertical w ay to prevent a CRT burn in.
How to select CRT Run In Cycle?
1. Push the cursor key ↑ or ↓ to highlight CRT Run In Cycle and press ENTER to select. (menu 9-37)
The CRT Run In Cycle menu will be displayed. (menu 9-38)
2. Press EXIT to quit the CRT Run In Cycle.
COMMON SETTINGS
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
MEMORY BANKS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 9-37
CRT RUN IN CYCLE
A flashing white pattern will
be
generated until <EXIT> is
pressed.
The projector only uses memory
blocks adjusted on an internal
# pattern: if no such block
is
available, the projector can’t
run
the procedure and leaves the
adjustment mode.
<ENTER> to continue
<EXIT> to cancel
Menu 9-38
9.5.4 Projector Warm Up
What can be done?
When in the ON position (and the CRT run in cycle is OFF), the projector can start u p with a warm up period of 20 minutes. During
the start up a w arm up menu will be displaye d. This menu offers the pos sibility to skip the warm up period anyway by pressing the
EXIT key and offers the possibility to adjust t he horizontal and vertical amplitude of this white image with the control disc. During this
warm up period, a full white image is shifted on the CRT f aceplate to av oid a burn in. Every 30 s econds a text box will be displayed
on another place on the screen with the remaining time to go . When EXIT is pressed during this w arm up period, the war m up menu
will be redisplayed with the remaining time indication. Press another time EXIT to interrupt the warm up cycle. W hen the war m up
option is OFF, when switching on the projector, it starts immed iately with the projection of the selected source.
How to select
1. Push the cursor key ↑ or ↓ to highlight Projector Warm Up. (menu 9-39)
2. Press ENTER to select.
The projector warm up menu will be displayed. (menu 9-40)
3. Press ENTER to toggle the ON/OFF option.
COMMON SETTINGS
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
MEMORY BANKS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 9-39
PROJECTOR WARM UP
OPTION : ON
A FULL WHITE PATTERN
WILL BE GENERATED FOR
20 MINUTES AT POWER UP
AFTER THIS PROCEDURE
THE PROJECTOR IS READY
TO PERFORM IN OPTIMUM
CONDITIONS
TOGGLE OPTION ON OR OFF
with <ENTER>
<EXIT> to return
Menu 9-40
9.5.5 Memory Banks
What can be done?
The user has the possibility to c reate 8 different memory banks (formats) for each sou rce. B ut, the max imum allowed quantity of
memory banks for all sources together is 32. The option to create different memory banks for the same source can be sw itched ON
or OFF.
96
R5976584 BA RCO CINE7 26022003