482 CHAPTER 19: TRACE COMMANDS
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To delete the trace log, type the following command:
WX4400# clear log trace
See Also
■ “display log buffer” on page 490
■ “set log” on page 494
clear trace Deletes running trace commands and ends trace processes.
Syntax — clear trace {trace-area | all}
■ trace-area — Ends a particular trace process. Specify one of the
following keywords to end the traces documented in this chapter:
■ authorization — Ends an authorization trace
■ dot1x — Ends an 802.1X trace
■ authentication — Ends an authentication trace
■ sm — Ends a session manager trace
■ all — Ends all trace processes.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To clear all trace processes, type the following command:
WX4400# clear trace all
success: clear trace all
To clear the session manager trace, type the following command:
WX4400# clear trace sm
success: clear trace sm
