182 CHAPTER 7: AAA COMMANDS
See Also
■ “set accounting {admin | console}” on page 186
■ “set authentication admin” on page 189
■ “set authentication console” on page 191
■ “set authentication dot1x” on page 193
■ “set authentication last-resort” on page 197
■ “set authentication mac” on page 199
■ “set authentication web” on page 201
display accounting
statistics
Displays the AAA accounting records for wireless users. The records are
stored in the local database on the WX switch.
(To display RADIUS accounting records, see the documentation for your
RADIUS server.)
Syntax —
display accounting statistics
Server Name of each RADIUS server currently active.
Addr IP address of each RADIUS server currently active.
Ports UDP ports that the WX switch uses for authentication
messages and for accounting records.
T/o Setting of timeouts on each RADIUS server currently active.
Tries Number of retransmissions configured for each RADIUS
server currently active. The default is 3 times.
Dead Length of time until the server is considered responsive
again.
State Current state of each RADIUS server currently active:
■ UP (operating)
■ DOWN (unavailable)
Server groups Names of RADIUS server groups and member servers
configured on the WX switch.
set commands List of commands used to configure AAA on the WX
switch.
user and user group
profiles
List of user and user group profiles stored in the local
database on the WX switch.
Table 38 display aaa Output (continued)
