424 CHAPTER 15: 802.1X MANAGEMENT COMMANDS
Type the following command to display 802.1X statistics:
WX4400# display dot1x stats
802.1X statistic value
---------------- -----
Enters Connecting: 709
Logoffs While Connecting: 112
Enters Authenticating: 467
Success While Authenticating: 0
Timeouts While Authenticating: 52
Failures While Authenticating: 0
Reauths While Authenticating: 0
Starts While Authenticating: 31
Logoffs While Authenticating: 0
Starts While Authenticated: 85
Logoffs While Authenticated: 1
Bad Packets Received: 0
Table 77 explains the counters in the display dot1x stats output.
Table 77 display dot1x stats Output
Field Description
Enters Connecting Number of times that the WX switch state transitions to the
CONNECTING state from any other state.
Logoffs While
Connecting
Number of times that the WX switch state transitions from
CONNECTING to DISCONNECTED as a result of receiving an
EAPoL-Logoff message.
Enters Authenticating Number of times that the state wildcard transitions.
Success While
Authenticating
Number of times the WX switch state transitions from
AUTHENTICATING from AUTHENTICATED, as a result of an
EAP-Response/Identity message being received from the
supplicant (client).
Timeouts While
Authenticating
Number of times that the WX switch state wildcard
transitions from AUTHENTICATING to ABORTING.
Failures While
Authenticating
Number of times that the WX switch state wildcard
transitions from AUTHENTICATION to HELD.
Reauths While
Authenticating
Number of times that the WX switch state wildcard
transitions from AUTHENTICATING to ABORTING, as a result
of a reauthentication request (reAuthenticate = TRUE).
Starts While
Authenticating
Number of times that the WX switch state wildcard
transitions from AUTHENTICATING to ABORTING, as a result
of an EAPoL-Start message being received from the
Supplicant (client).
