118 CHAPTER 6: IP SERVICES COMMANDS
See Also
■ “set arp” on page 133
■ “set arp agingtime” on page 134
display interface Shows the IP interfaces configured on the wireless LAN switch.
Syntax — display interface [vlan-id]
■ vlan-id — VLAN name or number.
Default — If you do not specify a VLAN ID, interfaces for all VLANs are
displayed.
Usage — All.
History — Introduced in MSS Version 3.0.
Type Entry type:
■ DYNAMIC — Entry was learned from network traffic and
ages out if unused for longer than the ARP aging
timeout.
■ LOCAL — Entry for the WX switch’s MAC address. Each
VLAN has one local entry for the WX switch’s MAC
address.
■ PERMANENT — Entry does not age out and remains in
the configuration even following a reboot.
■ STATIC — Entry does not age out but is removed after a
reboot.
State Entry state:
■ RESOLVING — MSS sent an ARP request for the entry
and is waiting for the reply.
■ RESOLVED — Entry is resolved.
Table 26 Output for display arp (continued)
Field Description
