308 CHAPTER 9: MANAGED ACCESS POINT COMMANDS
See Also
■ “set service-profile ssid-name” on page 307
set service-profile
tkip-mc-time
Changes the length of time that MAP radios use countermeasures if two
message integrity code (MIC) failures occur within 60 seconds. When
countermeasures are in effect, MAP radios dissociate all TKIP and WPA
WEP clients and refuse all association and reassociation requests until the
countermeasures end.
Syntax —
set service-profile name tkip-mc-time wait-time
■ name — Service profile name.
■ wait-time — Number of milliseconds (ms) countermeasures remain in
effect. You can specify from 0 to 60,000.
Defaults — The default countermeasures wait time is 60,000 ms (60
seconds).
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — Countermeasures apply only to TKIP and WEP clients. This
includes WPA WEP clients and non-WPA WEP clients. CCMP clients are
not affected.
The TKIP cipher suite must be enabled. The WPA IE also must be enabled.
Examples — The following command changes the countermeasures
wait time for service profile sp3 to 30,000 ms (30 seconds):
WX4400# set service-profile sp3 tkip-mc-time 30000
success: change accepted.
See Also
■ “set service-profile cipher-tkip” on page 300
■ “set service-profile wpa-ie” on page 312
set service-profile
web-aaa-form
Specifies a custom login page to serve to Web AAA users who request
the SSID managed by the service profile.
