Filter
Top Products
83
Troubleshooting
APPENDIX
Remote control
Problem Cause Solution
The remote control does not
work for operating the
CinemaStation
The remote control may be operated
outside the remote control operation
range.
For information on the remote control
operation range, refer to “Using the
Remote Control” (page 18).
The remote control sensor on the
CinemaStation may be exposed to
direct sunlight or lighting (inverted
fluorescent lamps).
Change the lighting or CinemaStation’s
orientation.
The remote control mode selection
may be improper.
Select the mode that suits your purpose.
(page 6)
The batteries may be worn out. Replace the batteries with new ones.
(page 18)
The remote control does not
work for operating other AV
equipment
You may be trying to operate a
system component.
You cannot operate a system
component with the CinemaStation
remote control. Use the remote control
supplied with the product.
The remote control code may be
incorrect.
Set the correct remote control code.
(page 72) Depending on the model and
year of the product, the CinemaStation
remote control may not be able to
operate it partly or wholly. In this case,
use the remote control supplied with
each product.