Filter
Top Products
53
ENJOYING EXTERNAL AV SOURCES
If you connect an external AV component to CinemaStation, you can enjoy AV sources played back on that component
with CinemaStation. For details on connection methods, refer to “Connecting External AV Components” (pages 14 to
17). Also, you can operate the component using the CinemaStation remote control by setting a remote control code
(page 72).
Make sure you read the owner’s manual for your external AV component before making any connections or operating it.
If you connect the VIDEO IN L/R (AUDIO) jacks on the
CinemaStation to the audio output L/R jacks on your TV
using an audio pin cable (page 12), you can enjoy TV
sounds with the CinemaStation.
1 Turn on the TV, then press STANDBY/ON
( ) to turn on the CinemaStation.
2 Press VIDEO.
If you connect the VCR IN L/R (AUDIO VIDEO) jacks
on the CinemaStation to the audio/video output L/R jacks
on your VCR using an audio/video cable (page 15), you
can enjoy VCR sounds with the CinemaStation.
When you set the “Input Assign” to “VCR” (page 78) and “Input
Mode” to “AUTO” (page 79) in the Set Menu, the CinemaStation
outputs the source from the OPTICAL IN jack if any source is
input from it. To listen to the source input from the VCR IN jacks,
stop playback on the equipment connected to the OPTICAL IN
jack.
1 Turn on the TV and VCR, then switch the TV
input to which the CinemaStation is
connected.
2 Press STANDBY/ON ( ) to turn on the
CinemaStation.
3 Press VCR.
4 Start playback on the VCR.
Playing Back External Sources
Note
TV playback
TV
POWER
AUDIO
SELECT
NIGHT
SW
CENTER
SURR
SHIFT
STEREOMATRIX 6.1
A-B
REPEAT
ANGLE
SUBTITLE
STANDBY/ON
START
PTY SEEK
MODE
CINEMA
AMP
DVD/CD
VCR
VIDEO
TUNER
MOVIE MUSIC SPORTS GAME
SURROUND
STANDBY/ON
()
VIDEO
VCR playback
Note
TV
POWER
AUDIO
SELECT
NIGHT
SW
CENTER
SURR
SHIFT
STEREOMATRIX 6.1
A-B
REPEAT
ANGLE
SUBTITLE
STANDBY/ON
CINEMA
AMP
DVD/CD
VCR
VIDEO
TUNER
MOVIE MUSIC SPORTS GAME
SURROUND
STANDBY/ON
()
VCR