Filter
Top Products
Changing DVD Settings on the TV (On-Screen Menu)
31
BASIC OPERATION
*
1
Before configuring items in this menu, refer to the manual for your TV to make sure of the correct settings. Incorrect settings may
disable TV functions. If this happens and you cannot operate the On-Screen Menu due to the failure, carry out the procedure below.
■ To recover TV settings from a failure
1)
Press DVD/CD.
2)
Press s (for about 5 seconds) until “NTSC<->PAL” appears in the CinemaStation Display.
3)
For U.K. and Europe models: When connecting the TV to the AV MONITOR OUT jack, press s again to display
“YUV<->RGB”.
For all other models: Skip this step.
4)
Press e to switch the settings.
5)
If “NTSC/PAL SET” or “YUV/RGB SET” appears in the CinemaStation display, the recovery procedure is complete.
Main Menu Submenu Setting Item Function
Setup Access Disc lock
Sets Disc lock to “On” or “Off”. (page 44)
Change PIN
Changes the password. (page 45)
Enter PIN
Enters the password. (page 44)
Parental level
Sets the Parental Control level (0 to +8). (page 43)
Country
Selects the country in which you are using the CinemaStation.
TV shape
Sets the screen aspect of your TV to “4:3 panscan”, “4:3
letterbox”, or “Wide-screen (Widescreen)”.
TV
*
1
TV system
Sets the video signal system of your TV to “NTSC”, “PAL”, or
“AUTO”.
When using a TV compatible with both NTSC and PAL, set this
to “AUTO”. When using Progressive Scan (page 46), set this to
“NTSC” or “PAL” that matches to your TV.
Video Output
(For U.K. and Europe
models: When
connecting the TV to
the AV MONITOR OUT
jack, press s again to
display “YUV<->RGB”.
Otherwise, skip this
step.)
Sets the output signal of the AV MONITOR OUT jack to
“YUV” or “RGB”. When connecting your TV to the MONITOR
OUT (S VIDEO) jack, set this to “YUV”.
Language Default Sub-title
(Default Subtitle)
Selects a default subtitle language.
When playing a disc, the CinemaStation automatically uses the
selected language for the subtitle. If you play a disc that is not
compatible with the selected language, another language will be
selected automatically.
Menu Language
Select the language for the On-Screen Menu.
Default Audio
Selects a default audio language.
When playing a disc, the CinemaStation automatically uses the
selected language for the audio. If you play a disc that is not
compatible with the selected language, another language will be
selected automatically.
Audio Menu Digital output
Sets the output signal of the OPTICAL OUT jack to “All” or
“PCM Only”.
All: Outputs all types of digital signals that the CinemaStation
can reproduce.
PCM Only: Converts the signal to PCM before outputting it
(except for DTS sources). (When “PCM Only” is selected,
signals will not be output from the speakers, VCR OUT jack or
OPTICAL OUT jack during DTS playback.)
Features PBC
Sets video CD playback control to “On” or “Off”.
On: Playback control is activated, and you can display or hide a
disc menu using the MENU button on the remote control
(page 39).
Off: Disc menus do not appear on the TV screen.