Filter
Top Products
5 Package
5.1 Package supplied
When you order a SERVOSTAR 600 series amplifier (order numbers ð p.117), you will receive:
— SERVOSTAR 6xx
— mating connectors X3, X4, X0A, X0B, X7, X8
The mating SubD connectors and motor connector X9 are not part of the package!
— Assembly, Installation and Setup Instructions (product manual)
— Online documentation on CD-ROM
— Setup software DRIVE.EXE on CD-ROM
Accessories:
(must be ordered separately; description see accessories manual)
— AC synchronous servomotor (linear or rotary)
— motor cable (pre-assembled), or both motor connectors separately, with motor cable as a
cut-off length
— feedback cable (pre-assembled or both feedback connectors separately,
with feedback cable as length
— Power supply for encoders with a power consumption of more than 150mA (ð p. 113)
— Terminating adapter for encoders with no terminating resistors (ð p. 113)
— motor choke 3YL for cable length above 25m
— external regen resistor BAR(U)
— communications cable to the PC(ð p.69) or Y-adapter (ð p.84) for setting parameters of up
to 6 servo amplifiers from one PC
— power cable, control cables, fieldbus cables (as lengths)
5.2 Nameplate
The nameplate depicted below is attached to the side of the servo amplifier.
The information described below is printed in the individual fields.
14 SERVOSTAR
®
601...620 Product Manual
Package
07/2007 Danaher Motion
Typenbezeichnung
Spannungsversorgung
Model Number
Power Supply
Ser. Nr
Nennstrom
Ser. No.
Nom. Current
Bemerkung
Schutzart
Comment
Encl.Rating
Danaher Motion GmbH
Wacholderstr. 40-42
D-40489 Düsseldorf
www.DanaherMotion.com
Customer Support
Europe Tel. +49 (0)203 / 99790
Italy 3 36 594260Tel. + 9 (0) 2/
North America Tel. +1 540 633 3400
Umgebungstemp.
Ambient temp.
E217428
1VD4
LISTED
IND. CONT.EQ.
CUS
U
L
®
example
example
Hardware
Revision
CommentsSerial number
Servo amplifier type
max. ambient
temperature
Output current
in S1 operation
Hardware Revision
Enclosure Rating
Electrical supply
Installed load