Filter
Top Products
Original GreenStar Display—RTK
OUO6050,0000C40 –19–23SEP07–3/5
SBS Security can be operated in a Public or Secure
mode.
• Public – This mode does not restrict RTK vehicles from
receiving RTK corrections as long as they have the
same Network ID as the base station. This mode can
be used when conducting a RTK demo for potential
customers or field days.
• Secure – This mode restricts RTK vehicles from
receiving RTK corrections if their serial numbers are not
entered into the RAL
Deleting RAL
Screen: SETUP – RTK
Press: SETUP >> STARFIRE iTC >> DIFF
CORRECTION SETUP >> RTK SETUP >> RTK SECURE
NETWORK >> DELETE ENTIRE LIST
RTK vehicle serial numbers can be deleted individually or
the entire list can be deleted.
Deleting individual entries:
Press letter button next to ROVER # (1-99). Enter the
vehicle receiver stored number that will be deleted (1-99).
Press letter button next to ROVER HARDWARE SN.
Enter a non-zero number (example: “1”) in place of the
serial number. The serial number has been removed from
the RAL.
NOTE: Once a RTK vehicle serial number has been
deleted from the RAL, it will take approximately 18
minutes before the RTK vehicle will not longer be
able to operate off of that base station. During this
time the vehicle will transition into RTK extend.
Deleting entire list
Press letter button next to DELETE ENTIRE LIST.
Press letter button next to SUBMIT. It will change to
DELETED once the RAL has been deleted.
30-10
121907
PN=98
Continued on next page