Filter
Top Products
Original GreenStar Display—StarFire iTC
OUO6050,0002260 –19–14NOV06–4/5
7
4
1
0
5
2
9
6
3
.
8
CLR
SETUP
PAGE
RUN
INFO
SETUP
JOHN DEERE
Position vehicle in the
opposite direction at
the same location.
Press continue when ready.
TCM
A
B
C
D
E
F
G
Cancel
Continue
PC9563 –UN–06NOV06
TCM calibration complete
A——
B—Position Vehicle in the opposite direction at the
same location.
C—Press continue when ready.
D——
E——
F—Continue
G—Cancel
NOTE: While calibrating, TCM will provide a warning if it
detects vehicle roll angle is greater than 10°
relative to internal axis of TCM. If vehicle is on a
level surface and yet warning is displayed, check
mounting orientation of TCM and verify it is
aligned within 10° of vehicle axis.
2. Turn vehicle 180° to face opposite direction. Ensure
that tires are in proper location for fixed or floating front
axle.
3. Ensure vehicle has come to a complete stop (cab is
not rocking) and Press letter button next to
CONTINUE.
Continued on next page
25-14
121907
PN=73