Filter
Top Products
Original GreenStar Display—StarFire iTC
OUO6050,0002269 –19–14NOV06–1/1
INFO - GPS - PAGE 3
7
4
1
0
5
2
9
6
3
.
8
CLR
SETUP
PAGE
RUN
INFO
INFO
JOHN DEERE
Activations SF1, SF2 Ready, RTK
SF2 License Yes
SF2 End Date 10/17/2114
GPS
A
B
C
D
E
F
G
Receiver Hours 2016.7
Switched Volt
Unswitched Volt
CAN High Volt
CAN Low Volt
PAGE 3
Hardware P N 1 2 3 4 5 6 7 8 9 0
Hardware SN 200500
SW App Ver 1.00A
SW Loader Ver 000.XXX
12.6
12.6
2.4
2.6
PC9573 –UN–06NOV06
INFO - GPS - PAGE 3
A—Activations SF1, SF2 Ready, TRK
SF2 License
B—SF2 End Date
Receiver Hours
C—Switched Volt
Unswitched Volt
D—CAN High Volt
CAN Low Volt
E—Hardware Part Number
Hardware Serial Number
F—Software Application Version
Software Loader Version
G——
Screen: INFO- GPS - PAGE 3
Press: INFO >> STARFIRE RECEIVER >> PAGE >>
PAGE
This page shows detailed information about receiver. This
information will help troubleshoot receiver if a problem
occurs.
Activations: Activations displays all activation codes that
have been entered into receiver. SF1, SF2, and/or RTK.
Visit www.StellarSupport.com for additional activations.
SF2 License: If receiver currently has active SF2 license,
YES will be displayed. If not, NO will be displayed.
SF2 End Date: Date SF2 license will expire.
Receiver Hours: This cell displays number of hours on
receiver.
Serial Number: This cell shows receiver serial number.
This is required to obtain a StarFire signal license.
Hardware Version: This cell shows part number of
receiver.
Software Version: This cell displays version of software
being used by receiver.
NOTE: To acquire the latest version of software, visit
www.stellarsupport.com or contact your John
Deere dealer.
25-28
121907
PN=87