Filter
Top Products
RTK Base Station Setup
OUO6050,0002277 –19–27NOV06–4/6
PC8746 –UN–01SEP05
A—Receiver
To reduce both multipathing and shading, elevate the
base station receiver above any structure to which it is
attached. For best results, two meters or more from
the highest point of the structure is recommended. The
higher the better, but you must also ensure that the
base station receiver is attached solidly so there is no
movement of the receiver. Movement of the base
station receiver will result in the same movement in
your vehicle. The two base stations shown above are
examples of good base station locations, because the
trees are below the 7 degrees elevation mask and the
roof is not made of metal which helps to reduce
multipathing.
Continued on next page
35-13
121907
PN=120