Filter
Top Products
GS2 Display—StarFire iTC
OUO6050,000223C –19–14NOV06–1/2
INFO tab
PC9705 –UN–10NOV06
StarFire iTC - Main—Info Tab
A—Info tab E—Position Mode I—Altitude M—GPS Signal
B—Setup tab F—Differential Mode J—GPS Course N—Differential Signal
C—Activations tab G—Latitude K—GPS Speed O—Roll Angle
D—Serial Port tab H—Longitude L—Accuracy P—Yaw Rate
The INFO tab shows information and status of
incoming GPS and differential correction signals. No
information on this screen can be changed. It is for
viewing only:
• Position Mode: Indicates whether receiver is
calculating a 3D position, 2D position, or no position
(No Nav). It also shows status of differential signal:
SF1 (StarFire 1 differential), SF2 (StarFire 2
differential).
• Differential Mode: Indicates status of GPS signal:
2-D (two dimensional with latitude and longitude of
vehicle) or 3-D (three dimensional with altitude,
latitude, and longitude of vehicle).
• Lat: Displays vehicle location latitude coordinates
with respect to Equator (north or south).
• Lon: Displays vehicle location longitude coordinates
with respect to Prim Meridian (east or west).
15-2
121907
PN=10
Continued on next page