Filter
Top Products
Original GreenStar Display—RTK
OUO6050,0002272 –19–25NOV06–1/1
Repeater
PC9736 –UN–17OCT07
SETUP - RTK
A—RTK Operating Mode
B—RTK Time Slot
C—RTK Network ID
D——
E—Radio and Repeater Configuration
F——
G—Return to Differential Corrections Setup
NOTE: The radio can be configured to act separately as
repeater. A repeater is required if obstructions (i.e.
trees, hills, etc.) exist between base station and
vehicle(s).
A repeater consists of:
• Radio (configured as a repeater)
• Harness
• Mounting Bracket
• 12 Volt Power Source
To configure radio as repeater:
Screen: SETUP - RTK
Press: SETUP >> STARFIRE RECEIVER >> DIFF
CORRECTION SETUP >> RTK SETUP
1. Connect radio to receiver RTK harness.
2. Check that receiver has GPS position calculated.
3. Check that base station, vehicle, and repeater have
same Frequency, Network ID and Time Slot.
4. Press letter button next to CONFIGURE REPEATER
RADIO.
5. Radio will configure as repeater.
6. Disconnect repeater from receiver and wiring harness.
7. Reconnect original radio.
30-14
121907
PN=102