Filter
Top Products
GS2 Display—RTK
OUO6050,0000C24 –19–18OCT07–1/2
RTK Network Configuration
IMPORTANT: Anytime the radio is reconfigured or
changed, power must be cycled at the
GPS receiver before continuing.
Time Slot - RTK
NOTE: 10 Time Slots are available. The default time slot
is 1.
Check that base station, vehicle, and repeater
have same Frequency, Network ID and Time Slot.
Press input box and enter value (1 - 10)
The time slot may be changed if other RTK systems are
operating in area interference is causing decreased base
station communication performance.
Network ID – RTK
NOTE: 4001 network ID’s are available, default ID is 1.
Check that base station, vehicle, and repeater
have same Frequency, Network ID and Time Slot.
Press input box and enter value (1 - 4000)
Network ID for base station and vehicle receiver must
match. If more than one base station with same Network
ID numbers are within range, vehicle may lock on to either
one of the base stations. To prevent this from happening,
be sure to use unique network ID.
Repeater – RTK
NOTE: Radio can be configured to act separately as
repeater. A repeater is required if obstructions (i.e.
trees, hills, etc) exist between base station and
vehicle(s).
A repeater consists of
• Radio (configured as a repeater)
• Harness
• Mounting Bracket
• 12 volt Power Source
20-9
121907
PN=52
Continued on next page