Filter
Top Products
Original GreenStar Display—StarFire iTC
OUO6050,000225D –19–14NOV06–1/1
Setup—TCM
7
4
1
0
5
2
9
6
3
.
8
CLR
SETUP
PAGE
RUN
INFO
SETUP
SETUP
JOHN DEERE
TCM
off ON
A
B
C
D
E
F
G
Calibrate TCM
StarFire Height (in.)
(See TCM Manual)
PAGE 1
StarFire Mount Direction
backward FORWARD
Setup
TCM
126
1
StarFire Fore/Aft (in.)
(See TCM Manual)
PC9560 –UN–06NOV06
SETUP - TCM
A—TCM ON, OFF
B—Calibrate TCM
C—StarFire Height
D—StarFire Fore/Aft
E—StarFire Mount Direction, Backward, Foreward
F——
G—Return to Setup
Screen: SETUP - TCM
Press: SETUP >> STARFIRE RECEIVER >> TCM
SETUP
This screen allows operator to:
• Turn TCM ON/OFF
• Calibrate TCM for zero degree roll angle
• Manually insert height of receiver
• Manually insert fore/aft
• Change mounting direction of receiver
OUO6050,000225E –19–14NOV06–1/1
ON/OFF—TCM
NOTE: There is no indication on Run Pages if TCM is ON
or OFF.
TCM will default to ON when cycling power.
Press letter button A to toggle between ON and OFF
selection will appear boxed and in capital letters.
When TCM is turned off , StarFire GPS messages will not
be corrected for vehicle dynamics or side slopes.
25-9
121907
PN=68