Filter
Top Products
93
Setup Menu
Input Setup
Items described here are set when you press the input source buttons.
The DTR-10.5 is equipped with several types of jacks in addition to the standard audio and video jacks, and multiple jacks
are provided for each type. You may freely assign input sources such as CD, PHONO, TUNER, TAPE 1, TAPE 2, and
VIDEO 1-7 to these jacks.
Moreover, you can preset a listening mode, specify names for display, adjust audio delays, correct the difference in the
volume level from other input sources, and set the 12V trigger.
In particular, please be careful when setting the input jacks. Please properly specify settings for correct selection of
pictures and audio to be played by referring to the information you wrote down in the Your System Settings booklet.
In the case of NET AUDIO, you can specify settings for the server (See page 95).
Settings defaults are as follows:
Note:
Defaults may differ depending on your region or option board in use.
OSD Indication Audio Assign Video Assign
Analog Audio Multichannel Digital Audio i.LINK Composite
Video
S-Video Component
Video
HDMI
Name of Terminal
to be Set
AUDIO IN MULTI-CH
IN
DIGITAL IN iLINK VIDEO IN S VIDEO IN
COMPONENT
VIDEO IN
HDMI IN
NET AUDIO
No No No No Last Last Last Last
CD
1 2 Opt 2 No Last Last Last Last
PHONO
Phono No No No Last Last Last Last
TUNER
No No No No Last Last Last Last
TAPE 1
2 No Opt 3 No Last Last Last Last
TAPE 2
3 No Coax 1 No Last Last Last Last
DVD
4 1 Opt 1 No 1 1 RCA 1 HDMI 1
VIDEO 1
5 No Coax 2 No 2 2 RCA 2 HDMI 2
VIDEO 2
6 No Coax 3 No 3 3 RCA 3 Video
VIDEO 3
7 No Opt 4 No 4 4 RCA 4/BNC Video
VIDEO 4
8 No Opt 5 No 5 No No Video
VIDEO 5
9 No Coax 4 No 6 No No Video
VIDEO 6
No No Coax 5 No No 5 No Video
VIDEO 7
Front No Front Opt No Front Front No Video
Input Selector