Filter
Top Products
33
Installation and Connections
Connecting AV Components
—Continued
• When you play the audio signal from the DIGITAL IN terminals in Zone 2, the source will be downmixed into 2-
channel analog audio signal and output to the AUDIO OUT terminals.
• When you play the audio signal from the DIGITAL IN terminals in Zone 3, only the PCM signal will be output as an
analog source to the AUDIO OUT terminals. Similarly, with this connection, you can record only the PCM signal as
an analog source through the AUDIO OUT terminals.
• The audio input signal from the HDMI IN terminal can be output to the HDMI OUT terminal.
• The audio input signal from the MULTI-CH IN terminals in Zone 2 will be downmixed into a 2-channel source for
output. You cannot play the source from the MULTI-CH IN terminals in Zone 3 and record it.
Video cables
Note:
When you play the source in the remote zone (Zone 2 or Zone 3), connect the TV or monitor to the VIDEO 1, VIDEO
2, or VIDEO 3 terminal.
Cable names Cable forms Terminals shapes Description
Component video
connection cable
(RCA type)
In this connection, the video signal is decom-
posed into three color difference signals (Y, Pb/
Cb, and Pr/Cr) and carried through three
cables, which provides better video quality than
the S Video connection.
The terminal shape for the component video
connection cable can be BNC-type or RCA-
type. For the DTR-10.5, the USA and Canadian
models are equipped only with RCA-type termi-
nals, and the Australian model is equipped with
both RCA-type and BNC-type terminals. You
can also install an optional BNC type terminal
board for USA and Canadian models.
This connection cannot transmit information for
controlling video devices (e.g., aspect ratio).
Component video
connection cable
(BNC type)
S Video connection
cable
The video quality is better than with the com-
posite signal. In this connection, the DTR-10.5
cannot transmit the information for controlling
video devices (e.g., aspect ratio).
Video connection
cable
This connection transmits the standard video
signal and is widely used for various video
devices such as TV and video recorder.
HDMI connection
cable
This terminal board is optional.
This connection carries the video signals digi-
tally.
(Note that no audio signal is carried with this
unit.)
Y
P
B
P
R
Y
P
B
P
R
Y
P
B
P
R
Y
P
B
P
R
• Always refer to the instructions that came with the component that you are connecting.
• Do not plug in the power cord until all connections have been properly made.
• Insert all plugs and connectors securely. Improper connections can result in noise, poor performance, or
damage to the equipment.
Example: Audio connection cable
• Do not bind audio/video connection cables with power cords and speaker cables. Doing so may adversely
affect the picture and sound quality.
Wrong!
Right!