Filter
Top Products
139
Using the Remote Controller
Other Settings for the Remote Controller
Adding New Remote Controller Modes
You can add additional modes (DVD, TV, VCR, CBL,
SAT) to the remote controller. This is useful if, for
example, you have several DVD players or TVs.
Reordering the Remote Controller Modes
You can change the order in which the remote controller
modes appear when you roll the scroll wheel. The posi-
tion of the AMP mode cannot be changed.
Editing Remote Controller Modes
1
Press and hold the [Custom] but-
ton for more than three seconds.
The remote controller enters Custom
mode.
2
Roll the scroll wheel to select
“MODE,” and then press the scroll
wheel.
3
Roll the scroll wheel to select
“ADD,” and then press the scroll
wheel.
4
Roll the scroll wheel to select the
type of mode you want to add, and
then press the scroll wheel.
You can add up to 8 additional modes:
for example, 4 DVD, 2 TV, 1 VCR, and
1 CBL.
Custom
1
Press and hold the [Custom] but-
ton for more than three seconds.
The remote controller enters Custom
mode.
2
Roll the scroll wheel to select
“MODE,” and then press the scroll
wheel.
3
Roll the scroll wheel to select
“SORT,” and then press the scroll
wheel.
4
Roll the scroll wheel to select the
mode you want to move, and then
press the scroll wheel.
5
Roll the scroll wheel to select the
mode before which you want to
insert the specified mode, and
then press the scroll wheel.
Here the specified mode will be inserted
before the “VCR” mode.
If the move is successful, after “OK” has
been displayed, the SORT display (step
3) reappears.
Custom