Filter
Top Products
125
Using the Remote Controller
Operating Integra/Onkyo Products Using the Remote Controller
—Continued
1
On button
This button is used to turn on the DVD player.
2
Standby button
This button is used to set the DVD player to Standby.
3
Number/letter buttons
These buttons are used to enter title, chapter, and
track numbers and to enter times for locating spe-
cific points in time.
4
Mode button
This button is used with the scroll wheel to select
the remote controller modes. Press this button first,
and then roll the scroll wheel until “DVD” appears
on the display.
5
Top Menu button
This button is used to select a DVD’s top menu.
6
Up/Down/Left/Right [ ]/[ ]/[ ]/[ ] &
Enter buttons
These buttons are used to navigate DVD menus and
the DVD player’s onscreen setup menus. The
[Enter] button is used to start playback of the
selected menu title, chapter, or track and to confirm
settings.
7
CH/Disc +/– button
This button is used to select discs on a DVD changer.
8
Return/Exit button
This button is used to exit the DVD player’s
onscreen setup menu and to restart menu playback.
9
Display button
This button is used to display information about the
current disc, title, chapter, or track, including the
elapsed time, remaining time, total time, and so on.
0
Previous/Next [ ]/[ ] buttons
The Previous [ ] button is used to select the pre-
vious chapter or track. During playback it selects
the beginning of the current chapter or track. The
Next [ ] button is used to select the next chapter
or track.
A
FR/FF [ ]/[ ] buttons
The FR [ ] button is used to start fast reverse.
The FF [ ] button is used to start fast forward.
B
Pause [ ] button
This button is used to pause DVD playback.
C
Step/Slow [ ]/[ ] buttons
These buttons are used for frame-by-frame play-
back and slow-motion playback.
D
Subtitle button
This button is used to select subtitles.
E
Audio button
This button is used to select foreign language
soundtracks and audio formats (e.g., Dolby Digital
or DTS).
F
Repeat button
This button is used to set the repeat playback func-
tions.
G
A-B button
This button is used to set the A–B repeat playback
function.
H
Open/Close [ ] button
This button is used to open and close the disc tray.
I
LIGHT button
This button is used to turn on or off the remote con-
troller’s illuminated buttons.
J
Clear button
This button is used to cancel functions and to clear
entered numbers.
K
Input button
This button is used to select the input source. Press
this button first, and then roll the scroll wheel until
“DVD” appears on the display.
L
Menu button
This button is used to select a DVD’s menu.
M
VOL button
This button is used to set the volume of the
DTR-10.5.
N
Setup/Guide button
This button is used to access the DVD player’s
onscreen setup menus.
O
Muting button
This button is used to mute the DTR-10.5. This
function can be set only with the remote controller.
P
Play [ ] button
This button is used to start DVD playback.
Q
Stop [ ] button
This button is used to stop DVD playback.
R
Random button
This button is used with the random playback func-
tion.
S
Angle button
This button is used to select different camera angles.
T
Last Memory button
This button is used with the last memory function,
which allows you to resume DVD playback from
where you left off.
U
Memory button
This button is used with the memory playback func-
tion, which allows you to create a custom playlist of
titles, chapters, or tracks.
V
Search button
This button is used to search for titles, chapters,
tracks, and specific points in time.