Filter
Top Products
63
Operations
Listening to Radio Broadcasts
—Continued
Presetting a Radio Station
Up to 40 stations can be stored in memory as preset radio
stations.
Selecting a Preset Radio Station
When using the DTR-10.5:
When using the remote controller:
Erasing a Preset Radio Station
1
Tune into the radio station you
desire (See “Tuning Into a Radio
Station”).
2
Press the [Memory] button on the
front panel.
3
Using the [Select/Preset] dial,
select a preset number (from 1 to
40) to assign the station.
The “MEMORY” indicator blinks for 5
seconds. Complete the procedure while
the “MEMORY” indicator blinks. If the
“MEMORY” indicator disappears
before completing the procedure, go
back to step 2 and repeat the procedure
again.
4
Press the [Memory] button to final-
ize the procedure.
You can enter text names for any of the
preset radio stations (See page 97).
Phones
Listening
Mode
Audio
Selector
Tone Zone 2
Select/
Preset
Push To Enter
Setup
Control
/
Tuning
Push To Enter
Rec/
Zone 3
Digital S Video Video AudioLR
Video 7
Input
LevelExitLevelDimmerMemory
Tuning
Mode
Clear
Pure Audio
Open
DVD
Display Tape 1 Tape 2 Tuner Phono C
D Net Audio
Video 1 Video 2 Video 3 Video 4 Video 5 Video 6 Video 7
Standby
Master Volume
Rec/
Zone 3
Red
)
(
Main
Blue
(
)
Zone 2
Green
(
)
Standby/On
Tuning Mode
Memory
Tuner
Select/Preset
Memory
Tuning
Mode
Flashes
Select/
Preset
Memory
Tuning
Mode
Lights
1
Press [Tuner] input source button
on the DTR-10.5.
2
Using the [Select/Preset] dial,
select the number of the desired
preset station.
1
Press the [Input] button, and then
use the scroll wheel to select
TUNER.
To switch to FM or AM, press the scroll
wheel.
2
Use the [CH/Disc +/–] button to
select the presets.
Selecting Presets by Number
To select a preset by number, use the
remote controller’s number buttons. For
example, to select preset #7, press [7].
To select preset #12, press [1] then [2].
1
Press the [Tuner] input source but-
ton and use the [Select/Preset]
dial to select the preset radio sta-
tion that you want to erase (See
above).
2
Press and hold the [Memory] but-
ton and then press the [Tuning
Mode] button.
The selected preset station is erased.
Tuner
Select/
Preset
Input
CH
Disc
+
-
Tuner
Select/
Preset
Memory
Tuning
Mode