Filter
Top Products
Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsSettings
Setting items Setting contents
Satellite
Indicate satellite signal
strength.
When the input source is
XM
Display Condition
¡¡¡¡
Signal strength is strong
¡¡¡
Signal strength is good
¡¡
Signal strength is marginal
¡
Signal strength is weak
No signal
When the input source is
SIRIUS
Display Condition
¡¡¡
Signal strength is excellent
¡¡
Signal strength is good
¡
Signal strength is weak
No signal
n
n
Terrestrial
Indicate terrestrial signal
strength.
This can be set when the input source is
XM
SIRIUS
.
Install the antenna with radio reception sensitivity set to maximum.
•
•
Check the XM Radio and SIRIUS Radio Reception
Sensitivity (Antenna Aiming)
Default settings are underlined.
Setting items Setting contents
A1 ~ G8
Select the preset channel.
This can be set when the input source is
HD Radio
TUNER
.
1. Press p or ENTER.
2. Use o p to set the cursor to the character you want to change.
3. Use ui to change the character, then press ENTER.
Up to 8 characters can be input.
The input character type can be switched by pressing SEARCH on the
main remote control unit or MENU while the display name is being
changed.
The types of characters that can be input are as shown below.
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GSymbolsH ! # % & ‘ ( ) * + , - . / : ; < = “ > ? @ [ \ ] (Space)
GNumbersH 0123456789
4. Repeat steps 2 and 3 to change the display name.
•
•
•
Default
Reset all settings to factory
default.
Yes : Reset to the defaults.
No : Do not reset to the defaults.
Giving Names to Preset Stations (Preset Name)
Default settings are underlined.
Making the Input Settings (Source Select)