Filter
Top Products
Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsConnections
Connect the Tuner
Connecting Devices
TV
Select the terminal to use and connect the device.
Satellite Receiver / Cable Tuner (Set Top Box)
Select the terminal to use and connect the device.
XM
XM Connector
The AVR-4810CI is an XM Ready
®
receiver. You can receive XM
®
Satellite Radio by connecting to the XM Mini-Tuner and Home Dock
(includes home antenna, each sold separately) and subscribing to
the XM service.
Plug the XM Mini-Tuner and Home Dock into the XM connector on
the rear panel.
Position the Home Dock antenna near a south-facing window to
receive the best signal.
For details, see “Listening to XM Satellite Radio” (vpage 71).
When making connections, also refer to the operating instructions of
the XM Mini-Tuner and Home Dock.
•
•
•
XM Mini-Tuner and Home Dock
NOTE
Keep the power cord unplugged until the XM Mini-Tuner and Home
Dock connection have been completed.
SIRIUS, XM and all related marks and logos are trademarks of Sirius
XM Radio Inc. and its subsidiaries. All rights reserved. Service not
available in Alaska and Hawaii.
R
L
R
L
3-
065
"6%*0
7*%&0
"6%*0
065
7*%&0
47*%&0
065
065
015*$"-
TV
Set this to change the input signal to which the input source is
assigned.
“Input Assign” (vpage 58)
Set as Necessary
R
L
R
L
3-
065
"6%*0
7*%&0
"6%*0
065
7*%&0
47*%&0
065
065
$0"9*"-
Satellite Receiver / Cable Tuner
Set this to change the input signal to which the input source is
assigned.
“Input Assign” (vpage 58)
Set as Necessary
For instructions on HDMI connections, see “Connecting Devices
Equipped with HDMI Terminals” on page 17.
For instructions on HDMI connections, see “Connecting Devices
Equipped with HDMI Terminals” on page 17.