Filter
Top Products
Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsPlayback
Other Operations
When playing DSD signals in the DIRECT or PURE DIRECT mode,
the DSD signals are converted as such into analog signals. When
playing in other surround modes, the DSD signals are first converted
into PCM format, then into analog signals.
“DSD DIRECT” is shown on the display when playing DSD 2-channel
signals in the DIRECT mode. “DSD MULTI DIRECT” is shown on
the display when playing DSD multi-channel signals in the DIRECT
mode.
•
•
1
Either assign the input source to be used to “HDMI”
(vpage 59), or assign “D.LINK” at the “Digital”
setting (vpage 59 “Input Assign”).
2
Either turn <SOURCE SELECT> or press [INPUT
SOURCE SELECT] to select the input source assigned
in step 1.
The “ ” or “ ” indicator lights on the display.
3
Select the surround mode (vpage 87 “Selecting the
surround mode).
We recommend playing in the DIRECT mode.b
4
Start playing the Super Audio CD.
The “ ” indicator lights on the display.
For operating instructions, refer to the respective equipment’s
operating instructions.
b
Playing Super Audio CD
When using the audio/video recording connectors (VCR or DVR
outputs), you can record the audio or video from a different program
source while listening to the currently played track.
1
Press <ZONE2/3/4 / REC SELECT> .
“ZONE2 SOURCE” is shown on the display.
2
Turn <SOURCE SELECT> until “RECOUT SOURCE”
is displayed.
The “ ” indicator lights.
ZONE2 SOURCE ZONE2 TUNER ZONE2 HD Radio
····
RECOUT HD Radio RECOUT SIRIUS RECOUT SOURCE
····
3
Turn <SOURCE SELECT> to choose the input source
to be recorded.
4
Play the program source.
For operating instructions, refer to the respective equipment’s
operating instructions.
b
5
Start recording.
For operating instructions, refer to the respective equipment’s
operating instructions.
b
Recording on an External Device
(REC OUT mode)
Button located on both the main unit
and the remote control unit
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
[INPUT
SOURCE
SELECT]
[ MAIN]
<ZONE2/3/4 / REC SELECT>
<SOURCE SELECT>