Filter
Top Products
Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsConnections
Connecting Devices
%&/0/-*/,
"6%*0
Connections to Other Devices
Components Equipped with a DENON LINK
Connector
Multichannel playback is possible, including DVD-Audio and Super
Audio CD (vpage 98 “Playing Super Audio CD”).
In addition, refer to page 97 “Playing a Blu-ray Disc Player Compatible
with DENON LINK 4th” for information on connecting a player that
supports DENON LINK 4th edition.
Blu-ray Disc player /
DVD player
AM loop antenna assemblyn
Remove the vinyl tie and take out
the connection line.
Bend in the reverse direction.
a. With the antenna on top of any
stable surface.
Mount
b. With the antenna attached to a
wall.
Installation hole Mount
on wall, etc.
Connection of AM antennas
1. Push the lever. 2. Insert the conductor. 3. Return the lever.
NOTE
Do not connect two FM antennas simultaneously.
Even if an external AM antenna is used, do not disconnect the AM
loop antenna.
Make sure the AM loop antenna lead terminals do not touch metal
parts of the panel.
•
•
•
When connecting by use of DENON LINK, set “Digital” to
“D.LINK”.
“Input Assign” (vpage 59)
Set as Necessary
Direction of broadcasting station
HD Radio Receiver
HD Radio broadcasting currentry is available in the United States and
select other countries.
FM antenna
75 Ω/ohms
Coaxial cable
FM indoor antenna (dipole,
for HD Radio broadcasting,
supplied)
Ground
AM outdoor
antenna
AM loop antenna
(for HD Radio broadcasting,
supplied)
To prevent interference, install
at least 3.3 feet/ 1 m away
from the antenna connected
to the AVR-4810CI’s other AM
tuner terminal.
•
Black White