Filter
Top Products
0
Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsPlayback
GQuick Select DefaultsH
Input Source Volume
Quick Select 1 DVD –40dB
Quick Select 2 SAT/CBL –40dB
Quick Select 3 VCR –40dB
Calling the Settings Out
Naming Quick Select settings
See “Quick Select Name” (vpage 55).
n
NOTE
Input sources stored with the quick select function cannot be selected
if they have been deleted at “Source Delete” (vpage 53). In this
case, store them again.
The Quick Select function can be set separately for the different zones
(vpage 101 “Quick Select Function”).
Press QUICK SELECT at which the settings you want to
call out are saved.
The “ ”, “ ” or “ ” indicator lights on the display.
All of the settings in step 1 can be memorized together. By memorizing
frequently used settings, you can quickly access and enjoy a playback
environment that is consistently the same.
Saving the Settings
1
Set the items below to the settings you want to save.
q Input Source (vpage 31)
w Volume Level (vpage 85)
e Surround Mode (vpage 87)
r Audyssey Setting
(MultEQ
®
XT, Dynamic EQ™, Dynamic Volume™) (vpage
92, 93)
t Video Select (vpage 60)
2
Press and hold the desired QUICK SELECT until
“Memory” appears on the display.
The current settings will be memorized.
Saving Frequently Used Settings
(Quick Select Function)
To Cancel the Party Moden
“Rhapsody”, “Napster” and “USB” are not available in the Party
Mode.
There can only be one organizer in the network. To form a new party
mode, first cancel the current party mode.
Participating in the Party Mode as an Attendee
When the organizer starts the party mode, up to four attendees are
selected automatically. No operation is required.
When a device becomes an attendee, “ ” appears on the
display. The input source automatically switches to “NET/USB” and
the same network audio as on the organizer is played.
If there are fewer than four attendees, a device can join the party
mode after it has started. To participate in the party mode, perform
the operation described below.
•
•
•
1
Press [PARTY].
“Enter Party Mode?” is displayed.
An error message is displayed when you are not connected to a
network.
b
2
Press o p to select “Yes”, then press ENTER.
1
While in the party mode, press [PARTY].
“Exit Party Mode?” is displayed on the GUI screen.
2
Press o p to select “Yes”, then press ENTER.
In this case, the other devices remain in the party mode.
The same network audio (Internet Radio, Media Server or iPod
DIRECT) can be played on multiple DENON products equipped with
the Party Mode function and connected in a network.
The party mode consists of one organizer and up to four attendees.
When one unit starts the party mode as the organizer, up to four
devices on which the party mode function is activated automatically
participate in the party as attendees. “Party Mode Function” (vpage
50) must be set to “ON” ahead of time in order to use the party mode
function.
To Cancel the Party Moden
Starting the Party Mode as the Organizer
1
Press [PARTY] to become the organizer.
“Enter Party Mode?” is displayed.
An error message is displayed when you are not connected to a
network.
b
2
Press o p to select “Yes”, then press ENTER.
The “ ” indicator on the display lights. The input source
automatically switches to “NET/USB” and the attendees are
automatically selected.
3
Play the desired track.
1
While in the party mode, press [PARTY].
“Exit Party Mode?” is displayed on the GUI screen.
2
Press o p to select “Yes”, then press ENTER.
“Power off Attendees component?” is displayed.
3
Press o p to select “Yes” or “No”, then press
ENTER.
Yes
: The power of the attendees is turned off and the party
mode is canceled.
No
: The party mode is canceled without turning off the
power of the attendees.
Playing the Same Network Audio
on Different Devices Connected in a
Network (Party Mode Function)
Convenient Functions