Filter
Top Products
Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsSettings
GUI Menu Operation
1
Press [SOURCE SELECT].
Display the “Source Select” menu.
SOURCE SELECT
Source
DVD
Recent
Video
Player
Network
Tuner
Enter
Move
q Input Source : The name of the highlighted input source is
displayed.
w Recently used sources : The recently used input sources (up to
5) are displayed.
The currently selected input source
is highlighted.
“ ” is displayed when using
a Control dock for iPod.
Selecting the Input Source
There are three ways to select the input source, as described below.
q Selecting the input source using the “Source Select” menu (GUI
menu)
w Selecting the input source using the [INPUT SOURCE SELECT]
(Main remote control unit)
e Selecting the input source using the <SOURCE SELECT> (Main
unit)
q Using the “Source Select” Menu
Switch the main remote control unit to the “MAIN” or “MACRO”
mode when performing this operation (vpage 108 “Operating the
Main Remote Control Unit”).
If the main remote control unit is in “ZONE2”, “ZONE3” or “ZONE4”
mode, the “Source Select” menu will not be displayed when [SOURCE
SELECT] is pressed.
q
w
e
Input Assign
Input Mode
Video
Rename
Source Level
GExample 2H Audyssey Auto Setup screen
(with illustration)
Switch to the next item
Selected item
Switch the selected item
Switch to the next item
Switch the selected
item using ui.
b
Iconn
Listn
Selected item
(Use p or ENTER to switch.)
Switch the selected item
AUDYSSEY AUTO SETUP
1 2 3 4 5 6
Amp Assign
RETURN
Auto Setup Start
Channel Skip
STEP1 Preparation
Connect the speakers and place them according
to the recommendations in the manual.
Set the following items
if necessary.
Start Auto Setup
Enter Cancel
z9
z12
z13
z11
z8 : History icon
z9 : Operation guidance text
z10 : Operation step indicators
z11 : Illustration
z12 : Guide text for the currently selected
setup item
z13 : Operation button guidance
(Use i to switch.)
(Use p or ENTER to switch.)
(Use u to switch.)
z8
z10
Use the device selection buttons on the main remote control unit to
set the device to be operated beforehand.
When using with an iPod connected directly to the AVR-4810CI’s
USB pot, select “USB/iPod” for the input source.
Input sources that are not going to be used can be set ahead of time.
Make this setting at “Source Delete” (vpage 53).
To turn off the source selection menu without selecting an input
source, press [SOURCE SELECT] again.
•
•
•
•
w Operating on the Main Remote Control Unit
Press [INPUT SOURCE SELECT].
The desired input source can be selected directly.
b To operate the AVR-4810CI using the main remote control unit,
set the remote control unit to the “MAIN” mode (vpage 108
“Operating the Connected Devices by Remote Control Unit”).
b Pressing the VCR/DVR button and the CD/PHONO button on the
main remote control unit will switch between the following.
VCR/DVR :
VCR DVR
CD/PHONO :
CD PHONO
Turn <SOURCE SELECT>.
b If “ZONE2/3/4 Rec Select”, “Video Select” or “Tuning Preset”
mode is selected for the input source, press <SOURCE> before
turning the <SOURCE SELECT>.
e Operating on the Main Unit
e Icons for the input sources in the different categories are
displayed.
Video :
Player :
Network :
Tuner :
(SAT/CBL), (TV), (VCR), (DVR),
(V.AUX)
(HDP), (DVD), (CD), (PHONO)
(Favorites), (Internet Radio),
(Media Server), (USB/iPod), (Napster),
(Rhapsody)
(XM), (SIRIUS), (HD Radio), (TUNER)
2
Use uio p to select the input source icon, then
press ENTER.
The input source is set and the source selection menu is turned
off.