Filter
Top Products
Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsConnections
Required system
Broadband Internet connection
Modem
Router
When using the AVR-4810CI, we recommend you use a router
equipped with the following functions:
Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching
hub with a speed of 100 Mbps or greater.
When using with a wireless LAN, prepare a broadband router
with built-in access point.
Ethernet cable (CAT-5 or greater recommended)
Use for wired LAN.
Some flat type Ethernet cables are easily affected by noise.
We recommend using a normal type cable.
Computer
GRecommended systemH
OS :
Windows
®
XP Service Pack2 or later, Windows Vista
Software (Prepare one of the following.)
Windows Media Player ver.11
DLNA-compatible server software
Internet browser :
Microsoft Internet Explorer 6 or later
LAN port
300 MB or more free disk space
Operation is possible with DLNA servers other than the above,
but such DLNA servers are not supported. For details, check the
Web.
n
n
n
•
•
•
•
n
n
•
•
•
•
•
•
•
b
If you have an Internet provider contract for a line on which network
settings are made manually, make the settings at “Network
Connecting” (vpage 46).
With the AVR-4810CI, it is possible to use the DHCP and Auto IP
functions to make the network settings automatically.
When using the AVR-4810CI with the broadband router’s DHCP
function enabled, the AVR-4810CI automatically performs the IP
address setting and other settings.
When using the AVR-4810CI connected to a network with no DHCP
function, make the settings for the IP address, etc., at “Network
Connecting” (vpage 46).
The AVR-4810CI is not compatible with PPPoE. A PPPoE-compatible
router is required if you have a contract for a line of the type with
which the PPPoE is set.
Depending on the ISP with which you have your contract, it may be
necessary to make proxy server settings to use the Internet radio
function. If you made proxy server settings on the computer to
connect to the Internet, make the proxy server settings on the AVR-
4810CI in the same way.
•
•
•
•
•
NOTE
A contract with an ISP is required to connect to the Internet.
No additional contract is needed if you already have a broadband
connection to the Internet.
The types of routers that can be used depend on the ISP. Contact an
ISP or a computer shop for details.
Depending on the server, video files may be displayed, but they
cannot be played on the AVR-4810CI.
•
•
•
[Wireless LAN]
Connecting Devices
Internet
Modem
Computer
Router with
access point
To WAN side
Rod antenna
(supplied)
Turn clockwise.