A SERVICE OF

logo

F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999Page 5 - 20
Operations
k) You may now begin mounting from the front
operating position.
5.5.2 Pull roller manual nip
adjustment
If the main laminating rollers are heated,
mounting application may be run from the
rear operating position of the machine.
INFORMATION
a) Turn the MAIN POWER to the “ON
position.
Power
b) Press RESET. The front control panel will
illuminated.
Reset
c) Press SEL.
SEL
SAV
SHUT DOWN
0
JOB
=
Flashin
g
d) Press FWD s for a forward motor direction.
FWR
REV.
STOP
GO
SPEED
SAFETY
00.0
e) Bring the footswitch around to the rear of the
laminator.
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
WARNING