© GBC Pro - Tech August 1999Page 6 - 32
F - 160 Operation and Maintenance Manual
Applications
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
CAUTION
s) Replace the front infeed table. Ensure that the
table is seated properly.
t) Close the front and rear safety shields.
INFORMATION
The SAFETY indicator should not be
flashing when the tables are properly
seated and the safety shields are in
the closed position..
u) Press STOP.
FWR
REV.
STOP
GO
SPEED
SAFETY
00.0
v) Press SPEED
ss
ss
s to a speed you feel
comfortable working with. It is recommended
that SPEED not exceed 9 ft./ min.
( 2.74 m/ min. ) .
FWR
REV.
STOP
GO
SPEED
SAFETY
9.0
w) Press GO.
FWR
REV
.
STOP
GO
SPEED
SAFETY
9.0
WARNING
When the laminator rollers are in
motion, keep hands and fingers
away from the nip of the rollers.
You may be CRUSHED or BURNED!
x) Feed the images through the main rollers from
the front operating position of the laminator.
