F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999 Page 6 - 55
Applications
u) Press on the variable speed footswitch while
guiding the leader board into the nip to confirm
that the board is secure.
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
CAUTION
WARNING
Keep hands and fingers clear of
the laminator roller nip when
adjusting PRESSURE.
You can be CRUSHED or BURNED!
v) If the board is loose, press PRESSURE
tt
tt
t to
adjust the gap between the main rollers.
GAP
PRESSURE
1/4
Excessive pressure will cause the
substrate to bow or flatten.
INFORMATION
w) Press STOP.
FWR
REV.
STOP
GO
SPEED
SAFETY
00.0
x) Press REV
tt
tt
t to reverse the direction of the
motor.
FWR
REV.
STOP
GO
SPEED
SAFETY
00.0
WARNING
When operating the laminator through the
variable speed footswitch, keep your hands
away from the nip of the rollers. You may
be crushed or burned.
y) Press on the variable speed footswitch to back
the board out of the main rollers.
