F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999Page 5 - 14
Operations
a) Press TOP TEMP. s to set your upper roller
temperature.
TOP TEMP.
BOT. TEMP
SLEEP
68
68
b) If required, press BOT. TEMP. s to set your
lower roller temperature.
TOP TEMP.
BOT. TEMP
SLEEP
68
68
INFORMATION
When requiring top and bottom heat, it is
recommended to set both temperatures to
the same set point.
c) Press GAP t to set the gap to “0”.
GAP
PRESSURE
0
INFORMATION
Do not add PRESSURE when heating the
laminating rollers, this allows the high
release silicone to expand with minimum
restrictions.
d) Press FWD s to set a forward motion
direction.
FWR
REV.
STOP
GO
SPEED
SAFETY
0
e) Press SPEED s to set a speed of 2 ft/min
( .61 m / min. ).
FWR
REV.
STOP
GO
SPEED
SAFETY
2.0
Slow speed will assists with heat up times
and distributes heat evenly.
INFORMATION