F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999 Page 6 - 11
Applications
e) Press SEL. SEL will stop flashing.
SEL
SAV
SHUT DOWN
0
JOB
WARNING
Keep hands and fingers clear of the
laminator roller nip when changing GAP.
You can be CRUSHED or BURNED!
f) Press GAP
tt
tt
t to the required gap setting for
the substrate being used. The GAP DISPLAY
should reflect your desired setting.
GAP
PRESSURE
1/4
g) Press FWD
ss
ss
s.
FWR
REV.
STOP
GO
SPEED
SAFETY
00.0
WARNING
When operating the laminator using the
variable speed footswitch, keep hands and
fingers away from the nip of the rollers.
You may be CRUSHED or BURNED!
h) Press on the variable speed footswitch while
guiding the leader board into the nip to confirm
that the board is secure.
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
CAUTION
WARNING
Keep hands and fingers clear of
the laminator roller nip when
adjusting PRESSURE.
You can be CRUSHED or BURNED!
i) If the board is loose, press PRESSURE
tt
tt
t to
adjust the gap between the main rollers.
GAP
PRESSURE
1/4
