F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999 Page 6 - 21
Applications
o) Press STOP.
FWR
REV.
STOP
GO
SPEED
SAFETY
00.0
p) Press REV
tt
tt
t to reverse the direction of the
motor.
FWR
REV.
STOP
GO
SPEED
SAFETY
00.0
WARNING
When operating the laminator using the
variable speed footswitch, keep hands and
fingers away from the nip of the rollers.
You may be CRUSHED or BURNED!
i) Press on the variable speed footswitch to back
the leader board out of the main rollers.
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
CAUTION
Process
a) Pull the laminate to the upper rewind tube.
Refer to Figure 6.3.3
CAUTION
Make note of the rewind tube drive
direction when taping the laminate.
The laminate should separate under
the rewind tube.
Figure 6.3.3 Laminate to rewind
Rewind
tube
P.S.A.
Laminate
b) Use a piece of masking tape, to adhere the
leading edge of the laminate to the upper rewind
tube.
c) Wrap one full turn of laminate onto the upper
rewind tube.
