Filter
Top Products
DN1060 only).
Make sure the HDMI OUTPUT setting is set to [HDMI A] or [HDMI A + B] (for STR-
DN1060 only).
[284] Troubleshooting “BRAVIA” Sync (Control for HDMI)
TV sound cannot be heard from the speakers connected
to the receiver.
Make sure [Control for HDMI] is set to [On] in the HDMI Settings menu.
Make sure [Input Mode] for the TV input is set to [Auto].
Make sure your TV supports the ARC function. Make sure that the HDMI input of your TV
is labeled “ARC.”
If your TV has multiple HDMI input jacks, make sure the receiver is connected to the one
supports the ARC function.
Make sure your TV is connected to the HDMI OUT A (TV) jack of the receiver. (for STR-
DN1060 only)
Make sure the HDMI OUTPUT setting is set to [HDMI A] or [HDMI A + B]. (for STR-
DN1060 only)
[285] Troubleshooting “BRAVIA” Sync (Control for HDMI)
An MHL-compatible source device cannot be charged.
Check that the receiver is turned on.
Make sure the device is connected securely.
[286] Troubleshooting “BRAVIA” Sync (Control for HDMI)
No image from an MHL-compatible source device.
Check the settings of your device. For details, refer to the operating instructions of your
device.
Check that the device is connected via an MHL cable to the HDMI/MHL (VIDEO 2 IN) (*)
or HDMI IN SAT/CATV (MHL) jacks.