Filter
Top Products
3. Press / repeatedly to select the parameter you want to adjust, then press .
4. Press / repeatedly to select the setting you want, then press .
To return to the previous display
Press or BACK.
To exit the menu
Press AMP MENU.
Note
Some parameters and settings may appear dimmed on the display panel. This means that
they are either unavailable or fixed and unchangeable.
[217] Adjusting Settings
Using the menu on the display panel
Viewing information on the display panel
The display panel provides various information on the status of the receiver, such as the
sound field.
1. Select the input for which you want to check information.
2. Press DISPLAY MODE on the receiver repeatedly.
Each time you press DISPLAY MODE, the display will change cyclically as follows:
Index name of the input (*1) - Input you selected - Sound field currently applied (*2) -
Volume level - Stream information (*3)
When listening to FM radio
Preset station name (*1) - Frequency - Sound field currently applied (*2) - Volume level
When receiving RDS broadcasts (for European and Asia-Pacific
models only)
Program service name or preset station name (*1) - Frequency, band and preset
number - Sound field currently applied (*2) - Volume level
*1
Index name appears only when you have assigned one to the input or preset station. Index name
does not appear if only blank spaces have been entered or it is same as the input name.
*2
[PURE.DIRECT] appears on the display panel when the Pure Direct function is activated.
*3
Stream information may not be displayed.
Note