Filter
Top Products
The “BRAVIA” Sync function allows communication between Sony products such as TVs,
Blu-ray Disc players, DVD players, and AV amplifiers that support the Control for HDMI
function.
Control for HDMI is a mutual control function standard used by HDMI CEC (Consumer
Electronics Control) for HDMI (High-Definition Multimedia Interface).
We recommend that you connect the receiver to products featuring “BRAVIA” Sync.
[117] Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA”
Sync)
Preparing for “BRAVIA” Sync
Turn the Control for HDMI function on to use the "BRAVIA" Sync function. The Control for
HDMI function needs to be turned on separately for the receiver and the connected device.
1. Select [Setup] - [HDMI Settings] from the home menu.
2. Select [Control for HDMI].
3. Select [On].
The Control for HDMI function of the receiver is turned on.
4. Press HOME to return to the home menu.
5. Press HOME again to exit the home menu.
6. Select the HDMI input of the receiver to match the HDMI input of the connected device,
so that the image from the connected device is displayed.
7. Turn on the Control for HDMI function of the connected device.
For details on setting the connected device, refer to the operating instructions of the
respective devices.
8. Repeat steps 6 and 7 for other devices for which you want to use the Control for HDMI
function.
Note
Perform the steps above again if you unplug the HDMI cable or change the connection.
This function works only when [HDMI Out B Mode] is set to [Main]. (for STR-DN1060
only)