Filter
Top Products
You can enjoy sound from the receiver in Zone 2 by the following procedure.
1. Turn on the amplifier in Zone 2.
2. Press ZONE SELECT on the receiver repeatedly to select Zone 2.
3. Press ZONE POWER on the receiver.
Zone 2 is activated.
4. Select the source signals you want to output using INPUT SELECTOR on the receiver
while [2. xxxx (input name)] is shown on the display panel.
5. Adjust to a suitable volume.
Adjust the volume using the receiver in Zone 2. If you set [Zone2 Line Out] to
[Variable], you can also adjust the volume in Zone 2 using MASTER VOLUME on the
receiver while [2. xxxx (input name)] is shown on the display panel.
Hint
If [2. xxxx (input name)] disappears in step 4, press ZONE SELECT again.
To exit Zone 2 operation
Press ZONE SELECT on the receiver repeatedly to select the zone you want to exit, then
press ZONE POWER while [2. xxxx (input name)] is shown on the display panel.
Available input for Zone 2 operations
See “Available inputs for each zone (for STR-DN1060 only).”
Hint
A dedicated App for this model “SongPal” enables easier zone operation such as
changing the settings or switching the zone inputs from your smartphone or tablet.
[112] Using the Multi-Zone Features (for STR-DN1060 only)
Enjoying video and sound in
another room using a TV or another receiver (for STR-DN1060 only)
1. Connecting another amplifier or TV in the HDMI zone
(for STR-DN1060 only)
HDMI input video/audio signals are output in HDMI zone using the HDMI OUT B/HDMI
ZONE jack of the receiver.