Filter
Top Products
Warning 41, Warning 42:
The input from the microphone is too large.
The distance between the speaker and the microphone may be too small. Set them further apart
and perform the measurement again.
Warning 43:
The distance and position of a subwoofer cannot be detected. This may be caused by
noise. Try performing the measurement in a quiet environment.
[222] Troubleshooting General
The receiver is turned off automatically.
[Auto Standby] is set to [On].
The sleep timer function was activated.
[PROTECTOR] was activated.
[223] Troubleshooting General
Cannot find an available input when connecting several
digital devices.
You can reassign the COMPONENT VIDEO and COAXIAL/OPTICAL digital audio input
jacks to other inputs.
See “Using other video/audio input jacks (Input Assign).”
[224] Troubleshooting Image
No image appears on the TV.
Select the appropriate input using the input buttons.
Set your TV to the appropriate input mode.
Move your audio device away from the TV.
Assign the component video input correctly (for STR-DN1060 only).
Make sure that cables are correctly and securely connected to devices.
Some playback devices need to be set up. Refer to the operating instructions supplied