Filter
Top Products
[194] Adjusting Settings Bluetooth Settings
Selecting the BLUETOOTH mode (Bluetooth Mode)
You can enjoy contents from remote devices on this receiver or listen to sound from this
receiver on other devices such as headphones.
1. Select [Setup] - [Bluetooth Settings] from the home menu.
2. Select [Bluetooth Mode].
3. Select the setting you want.
Receiver: The receiver is in receiver mode which enables it to receive and output
audio from the remote device.
Transmitter: The receiver is in transmitter mode which enables it to send audio to
the remote device.
[BT TX] appears on the display panel.
Off: The BLUETOOTH power is turned off and [Listen] - [Bluetooth] cannot be
selected from the home menu. The NFC function is also not available.
Note
[Bluetooth Mode] cannot be switched while the input of the receiver is set to
[BLUETOOTH] or [Screen mirroring].
No sound is output from the speakers connected to the receiver when [Bluetooth Mode] is
set to [Transmitter].
In [Transmitter] mode, the receiver can send audio to up to 1 device.
Hint
You can set the transmission data rate for LDAC playback [Wireless Playback Quality] in
the Bluetooth Settings menu.
If you connect to the receiver from your smartphone while [Transmitter] is selected and no
device is connected to the receiver, the setting automatically switches to [Receiver] and
you can listen to the sound from your smartphone on the receiver.
You can also switch between BLUETOOTH RX mode and BLUETOOTH TX by pressing
BLUETOOTH RX/TX button on the remote control.
You can adjust the volume of the device from the receiver when [Transmitter] is selected.