Filter
Top Products
This function may not work depending on the audio format.
The receiver may play signals at a lower sampling frequency than the actual sampling
frequency of the input signals depending on the audio format.
Hint
You can also select [In-Ceiling Speaker Mode] in [Sound Effects] from the home menu.
To obtain the optimal sound for your listening environment, configure the [Ceiling Speaker
Height] setting in the Speaker Settings menu, then perform Auto Calibration.
[159] Adjusting Settings
Audio Settings
Enjoying high-fidelity sound (Pure Direct)
You can enjoy higher-fidelity sound from all inputs using the Pure Direct function. When the
Pure Direct function is on, the display panel lights off to suppress noise that affects sound
quality.
1. Select [Sound Effects] - [Pure Direct] from the home menu.
2. Select [On].
Canceling Pure Direct
The Pure Direct function will be canceled when you perform the following:
Select [Off] in step 2.
Press PURE DIRECT on the receiver.
Change the sound field.
Change the scene setting on the TV (Scene Select).
Change the setting of [Equalizer], [Sound Optimizer], [Advanced Auto Volume], [Dynamic
Range Compressor], [In-Ceiling Speaker Mode], [Automatic Phase Matching],
[Calibration Type] or [LFE Time Alignment].
Note
[Equalizer], [Sound Optimizer], [Advanced Auto Volume], [Dynamic Range Compressor],
[In-Ceiling Speaker Mode], [Automatic Phase Matching], [Calibration Type] and [LFE
Time Alignment] do not work when the Pure Direct function is selected.
Hint
You can also use the PURE DIRECT button on the receiver to turn the Pure Direct
function on or off.
You can also select [Pure Direct] in [Setup] - [Audio Settings] from the home menu.