Filter
Top Products
The adjusted value is shown on the TV screen during adjustment.
To output a test tone from adjacent speakers
See “Adjusting the balance between adjacent speakers by outputting a test tone (Phase
Noise).”
To output the source sound from adjacent speakers
See “Adjusting the balance between adjacent speakers by outputting a source sound (Phase
Audio).”
[149] Adjusting Settings Speaker Settings
Setting the crossover frequency of the speakers
(Crossover Frequency)
You can set the bass crossover frequency of speakers for which the speaker size has been
set to [Small] in the Speaker Settings menu. A measured speaker crossover frequency is set
for each speaker after the Auto Calibration is performed.
1. Select [Setup] - [Speaker Settings] from the home menu.
2. Select [Crossover Frequency].
3. Select the speaker for which you want to adjust the crossover frequency on the screen.
4. Press / to set the crossover frequency.
Note
This function does not work in the following cases:
Headphones are connected.
[Bluetooth Mode] is set to [Transmitter].
The surround back speakers will be set to the same setting as that of the surround
speakers.
[150] Adjusting Settings
Speaker Settings
Adjusting the equalizer (Equalizer)