Filter
Top Products
64
En
Cassette deck operations
You can use this remote control to control a single or a double cassette deck after you program the deck player
into it. If you have a regular cassette deck with only one set of tape heads use the buttons on the right marked
“SINGLE/DECK II“. If you have a double cassette deck with use the buttons on the left for deck I and the
buttons on the right for deck II.
• The following operations are available from the Amplifier’s remote control after you program
your Cassette deck into it, but some operations may need to be learned separately by the
amplifier (see “Setting Up the Remote Control to Control Other Components,“ p.52-55).
• To perform these operations, press the MD/TAPE1 button to set the remote to the TAPE operation
mode.
• For more information on individual commands consult the manual that came with the component.
DECK SINGLE/DECK
1
Press to switch the cassette deck on or off (not
possible with all models, especially those without
a standby mode).
2 1
Press to rewind the tape.
3 7
Press to stop playback or recording.
4 2
Press to start reverse playback (for auto reverse
decks).
5 3
Press to start playback of the side of the cassette
which has been loaded as the front.
6 ¡
Press to fast forward the tape.
7 8
Press to pause playback or recording.
1
Press to switch the cassette deck on or off (not
possible with all models, especially those without
a standby mode).
2 2
Press to start reverse playback (for auto reverse
decks).
3 3
Press to start playback of the side of the cassette
which has been loaded as the front.
4 7
Press to stop playback or recording.
5 ¡
Press to fast forward the tape.
6 REC MUTE
Press and hold to make a blank space during
recording. The recording will be muted for as long
as the button is held down.
7 REC ¶
Press to start recording (may put some decks in
REC PAUSE mode).
8 8
Press to pause playback or recording.
9 1
Press to rewind the tape.
memo
Tape
DECK
REC REC
MUTE
SINGLE / DECK
1
2
3
4
5
67
Tape
DECK
REC REC
MUTE
SINGLE / DECK
1
8
5
4
2
6
7
9
3
Remote Control of Other Components