Filter
Top Products
OPERATION
OPERATION
43
En
Basic Playback
STEREO mode
Use the STEREO mode to enjoy standard (two-channel) stereo sound from the front left and right speakers.
This mode is most like the sound reproduction you would get from a regular stereo receiver or amplifier that is
not equipped to handled A/V formats as this one is. You might want to use this mode for listening to regular
music sources (like CDs) but remember, you will only get sound from your front two speakers (and possibly your
subwoofer).
DSP modes
The DSP (Digital Signal Processing) modes allow you to transform your living room into a variety of different
sonic environments when playing either two-channel or multi-channel sources. If you have SURROUND BACK
speakers switched on (see p.32-33) then 7.1 will appear after the name of all of these modes in the display on
the amplifier.
HALL 1
Simulates the acoustic effects of a large concert hall. Suitable for classical music. A long delay time of
reflected sounds, coupled with reverb effects, let the listener enjoy the dynamic and rich sounds
characteristic of concert halls and powerful orchestral performances.
HALL 2
Simulates the acoustic environment of a very resonant concert hall. Rich reverberation and a full sound
create the impression of a lively performance space.
JAZZ
Simulates the acoustic effects of a jazz club. Reflected sound is virtually below 100 msec so that the
listener can enjoy a live band effect.
DANCE
Simulates the acoustic effects of a dance club. Features a strong bass sound.
Reflected sound delay time is virtually below 50 msec, for the listener to enjoy the visceral power of dance
music.
THEATER 1
Reproduces theater sound field effects without losing the localization of each channel. Theater effects can
be enjoyed without losing Dolby Digital/ Pro Logic effects when used in combination those formats (with
movies bearing the
DOLBY SURROUND
trademark).
THEATER 2
Simulates the acoustic environment of a theater while maintaining proper localization of each channel.
5/7CH STEREO
Simulates the acoustic environment of a regular stereo while using all the speakers in the system to induce
a rich, all-around sound. If you have SURROUND BACK speakers switched on (see p.32-33) then the name
of this mode will be 7CH STEREO in the display on the receiver. If the SURROUND BACK speakers are
switched off, then the mode will appear as 5CH STEREO.