Filter
Top Products
VI
En
Quick Start Guide
55
55
5 Playing a DVD with Surround Sound
1 Turn on the Amplifier, your TV, and the DVD player.
2 Press the STANDARD button on the front panel for the basic surround
sound setting.
You can also press the remote control AMP button and then press the STANDARD button on that
Amplifier MAIN screen.
3 Press the DVD/LD button on the remote control.
You should see "DVD/LD" in the display on the amplifier.
4 Play a DVD.
66
66
6 For Better Surround Sound
1 Go through the entire "system setup" procedures as outlined on pages
30-39 of this instruction manual.
If you don't hook up any other components with digital audio or do so following the default settings of
the amplifier (see p.14) you won't have to assign any more digital inputs, but many other adjustments
will improve the sound tremendously.
2 Experiment with the different sound settings offered with the 2/DTS/
MPEG and DSP buttons.
For more information see p.41-45.
3 As mentioned above you should go through the "speaker setup" instructions
on pages 30-39 to set up your speakers properly. If you don't do this you, at
least, need to make sure the CENTER channel is turned off if you don't have a
center speaker. Use the instructions on pages 30-33 to get the display below
on your remote control.
If you don't have a center speaker press the CENTER button until the box
appears empty. Then press the SETUP OK button to EXIT and go back to the
System Setup screen.
++
+
+
Speaker Setting
SETUP
OK
FREE
THX
Front
L
Center
Front
R
Sub
woofer
Surround
L
Surround
R
Surround back (not hooked up)
BACK
(not hooked up)