Filter
Top Products
OPERATION
OPERATION
45
En
Playing Sources with Dolby Digital, MPEG or DTS
Sound
The following instructions show you how to play Dolby Digital, MPEG or DTS sound sources with the VSA-E08.
1
Turn on the power of the playback
component.
2
Press the STANDBY/
ON button to turn on the
amplifier.
Be sure that the standby indicator
turns off on the front panel.
3
Press the FUNCTION button on the
remore control to select the source
you want to playback.
Alternatively, Use the INPUT SELECTOR on the front
panel.
The FUNCTION button cycles through the sources in
the following order:
DVD/LD TV/SAT CD
VIDEO
VCR 1 PHONO
MD/TAPE 1
LINE/
TUNER
VCR 2
4
Press the AMP.
The AMPLIFIER MAIN SCREEN appears on the
remote.
5
Choose a 2/DTS/MPEG mode by
pressing THX, ADVANCED THEATER
or STANDARD.
You need to choose on of the modes to get surround
sound. For more see “Sound Modes,” on p.41-43.
6
Press the SIGNAL SELECT button
the input signal corresponding to
the source component (setting the
switch to AUTO assures the proper
signal will be selected).
(See “Switching ANALOG/DIGITAL signal input” on p.
47.)
7
Play a source (for example, a DVD).
8
Adjust the volume by using the
MASTER VOLUME buttons on the
remote control or the MASTER
VOLUME on the front panel.
Return to the AMPLIFIER screens (by pressing to
AMP button and SUB, if needed) to make other sound
adjustments like bass/treble, loudness etc.
memo
Basic Playback
4
+
VOL
+
ENTER
AMP
DVD/LD
TV/SAT
VCR1
VCR2
REMOTE
SETUP
MD/TAPE1
CD
LINE/
TUNER
TV
CONTROL
FUNCTION
TV
CONTROL
MUTING
MASTER VOLUME
SYSTEM
OFF
MULTI
OPERATION
STANDBY/ON
—
VOL
—
CH
—
CH
+
FUNCTION
BACK LIGHT
use lock
on/off
3
5
8
6
+
VOL
+
ENTER
AMP
DVD/LD
TV/SAT
VCR1
VCR2
REMOTE
SETUP
MD/TAPE1
CD
LINE/
TUNER
TV
CONTROL
FUNCTION
TV
CONTROL
MUTING
MASTER VOLUME
SYSTEM
OFF
MULTI
OPERATION
STANDBY/ON
—
VOL
—
CH
—
CH
+
FUNCTION
BACK LIGHT
use lock
on/off
Amplifier
MAIN SUB
DSP STEREO
THX
ADVANCED
THEATER
EFFECT
STANDARD
MIDNIGHT
LOUDNESS
SIGNAL
SELECT
DIGITAL
NR
/ dts / MPEG
MULTI CH
IN
8
3
5
2
6
(SIGNAL SELECT)
• We recommend using different modes for
different types of DTS material. For watching
movies, the STANDARD, THX or ADVANCED
THEATER setting should provide the best
results. For listening to music, the STANDARD,
DIRECT, STEREO, or DSP modes should serve
the listener best.
• Make sure you connect your DVD/LD or LD
players using the 2 RF jack. If your player has
an 2 RF output this will ensure you can use all
LDs. Refer to p.14.
STANDBY
indicator
2