Filter
Top Products
46
En
Playing Sources with Stereo Sound
The following instructions show you how to play audio or audio-visual sources with the VSA-E08.
If the TAPE 2 indicator is visible in the display, it means the TAPE 2 MONITOR is on. Press TAPE 2
MONITOR on the front panel to turn it off unless you want to listen to TAPE 2.
1
Turn on the power of the playback
component.
2
Press the STANDBY/
ON button to turn on the
amplifier.
Be sure that the standby indicator
turns off on the front panel.
3
Press the FUNCTION button on the
remore control to select the source
you want to playback.
Alternatively, Use the INPUT SELECTOR on the front
panel.
The FUNCTION button cycles through the sources in
the following order:
DVD/LD TV/SAT CD
VIDEO
VCR 1 PHONO
MD/TAPE 1
LINE/
TUNER
VCR 2
4
Press the AMP.
The AMPLIFIER MAIN SCREEN appears on the
remote.
5
Press the STEREO button to select
the stereo mode.
The STEREO indicator lights on the display.
6
Press the SIGNAL SELECT button
to select the input signal
corresponding to the source
component (setting the switch to
AUTO assures the proper signal will
be selected).
(See “Switching ANALOG/DIGITAL Signal Input” on
p.47.)
7
Start playback of the component
you selected in step 1.
8
Adjust the volume by using the
MASTER VOLUME buttons on the
remote control or the MASTER
VOLUME on the front panel.
Return to the AMPLIFIER screens (by pressing to
AMP button and SUB, if needed) to make other sound
adjustments like bass/treble, loudness etc.
If you are not able to get sound from the
amplifier the problem may well lie with
the SIGNAL SELECT switch. You need
to make sure the input is set to the
appropriate ANALOG or DIGITAL setting.
Refer to page 47 for more on this.
8
3
2
6
(SIGNAL SELECT)
2
4
3
6
8
+
VOL +
ENTER
AMP
DVD/LD
TV/SAT
VCR1
VCR2
REMOTE
SETUP
MD/TAPE1
CD
LINE/
TUNER
TV
CONTROL
FUNCTION
TV
CONTROL
MUTING
MASTER VOLUME
SYSTEM
OFF
MULTI
OPERATION
STANDBY/ON
–
VOL –
CH –
CH +
FUNCTION
BACK LIGHT
use lock
on/off
+
VOL +
ENTER
AMP
DVD/LD
TV/SAT
VCR1
VCR2
REMOTE
SETUP
MD/TAPE1
CD
LINE/
TUNER
TV
CONTROL
FUNCTION
TV
CONTROL
MUTING
MASTER VOLUME
SYSTEM
OFF
MULTI
OPERATION
STANDBY/ON
—
VOL —
CH —
CH +
FUNCTION
BACK LIGHT
use lock
on/off
Amplifier
MAIN SUB
DSP STEREO
THX
ADVANCED
THEATER
EFFECT
STANDARD
MIDNIGHT
LOUDNESS
SIGNAL
SELECT
DIGITAL
NR
/ dts / MPEG
MULTI CH
IN
memo
memo
Basic Playback
STANDBY
indicator
5
5